Plastik Hammadde
Hammadde halinde plastik malzemeler için sıklıkla kullanılan standartlar bu kategoride listelenmiştir. Daha fazla detay için iletişime geçebilirsiniz.
ISO 1133-1 Erime Akış İndisi (Melt Flow Index)
Plastics - Determination of the melt mass - Flow rate (MFR) and the melt volume - Flow rate (MVR) of thermoplastics
ASTM D 3364 Erime Akış İndisi PVC (Melt Flow Index)
Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications
ASTM D 3835 Viskozite
Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
ISO 17744 pVt
Plastics — Determination of specific volume as a function of temperature and pressure (pvT diagram) — Piston apparatus method
ASTM D 5930 Termal iletkenlik
Standard Test Method For Thermal Conductivity Of Plastics By Means Of A Transient Line-Source Technique
ISO 12418 Instrinsic Viscosity
Plastics — Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates — Part 2: Preparation of test specimens and determination of properties
ISO 527-2 Çekme
Plastics-Determination of tensile properties-Part 2: Test conditions for moulding and extrusion plastics
ASTM D 638 Çekme
Standard Test Method for Tensile Properties of Plastics
ISO 178 Eğme
Plastics — Determination of flexural properties
ASTM D 790 Eğme
ASTM D790 3-point flexure test on plastics
ISO 604 Basma
Plastics — Determination of compressive properties
ASTM D 1708 Mikro Çekme
Standard Test Method For Tensile Properties Of Plastics By Use Of Microtensile Specimens
ISO 48-4 Shore sertlik
Rubber, vulcanized or thermoplastic — Determination of hardness — Part 4: Indentation hardness by durometer method (Shore hardness)
ISO 1183-1 Yoğunluk
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method
ISO 75 HDT
Plastics - Determination of temperature of deflection under load - Part 1: General test method
ISO 306 Vicat
Plastics - Thermoplastic Materials - Determination Of Vicat Softening Temperature (VST)
ASTM D 648 HDT
Standard Test Method For Deflection Temperature Of Plastics Under Flexural Load In The Edgewise Position
ASTM D 1525 Vicat
Standard Test Method For Vicat Softening Temperature Of Plastics
ISO 179-1 Charpy Darbe
Plastics - Determination Of Charpy Impact Properties - Part 1: Non-Instrumented Impact Test
ISO 180 Izod Darbe
Plastics - Determination of Izod impact strength
ASTM D 256 Izod Darbe
Standard Test Methods For Determining The Izod Pendulum Impact Resistance Of Plastics
ASTM D 6110 Çentikli Darbe
Standard Test Method For Determining The Charpy Impact Resistance Of Notched Specimens Of Plastics
ISO 8256 Darbeli Çekme
Plastics-Determination of tensile-impact strength (ISO 8256:1990, including Technical Corrigendum 1:1991)
ISO 6603-1 Drop weight
ISO 6603-1 Drop weight
ISO 6603-2 Drop weight (Instrumented)
ISO 6603-2 Drop weight (Instrumented)
ASTM D746 Gevreklik (Brittleness)
ASTM D746 Gevreklik (Brittleness)
ISO 974 Gevreklik (Brittleness)
ISO 974 Gevreklik (Brittleness)
ASTM D 1693 Çevresel Gerilim Dayanımı (ESCR)
ASTM D 1693 Çevresel Gerilim Dayanımı (ESCR)
ASTM D 1822 Darbeli Çekme
ASTM D 1822 Darbeli Çekme
ISO 899-1 Sürünme (çekme yönü)
ISO 899-1 Sürünme (çekme yönü)
ISO 899-2 Sürünme (eğme yönü)
ISO 899-2 Sürünme (eğme yönü)
ASTM D 2990 Sürünme
ASTM D 2990 Sürünme
ISO 1133-2 Erime Akış İndisi (Melt Flow Index)
Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture
AKPINAR TEST ÖLÇÜM
Dostlarımız Ve Mutlu Müşterilerimiz
Cras justo odio, dapibus ac facilisis in, egestas eget quam. Donec id elit non mi porta gravida at eget metus. Nullam id dolor id nibh ultricies vehicula ut id elit.
Yusuf M. A.
Cras justo odio, dapibus ac facilisis in, egestas eget quam. Donec id elit non mi porta gravida at eget metus. Nullam id dolor id nibh ultricies vehicula ut id elit.
Kemal A
Cras justo odio, dapibus ac facilisis in, egestas eget quam. Donec id elit non mi porta gravida at eget metus. Nullam id dolor id nibh ultricies vehicula ut id elit.